Key Specifications at a Glance
| Product | Kraft paper cone for textile yarn winding |
|---|---|
| Taper angles | 4°20′ and 5°57′ |
| Cone length | 170–173mm |
| Surface finishes | Smooth, Velvet, Embossed |
| HS code | 4822.10.00 |
| Machine compatibility | Murata, Savio, Schlafhorst / Rieter Autoconer |
| Shipping terms | FOB Chattogram, Bangladesh — all-inclusive |
| Minimum order | Contact for current MOQ |
| Manufacturer | Aziz Packaging Limited, Narayanganj 1450, Bangladesh |
For full dimensional tolerances — height, nose inner diameter, base inner diameter, wall thickness and GSM — see the paper cone specifications page or the paper cone for yarn winding page with side-by-side spec tables for both taper angles.
Why Cone Consistency Matters on the Spinning Mill Floor
A paper cone is not passive packaging on a spinning mill floor — it's the surface the yarn is wound onto and unwound from at speed. Cone-to-cone variation in taper angle, roundness, or wall stiffness shows up downstream as uneven unwind tension, package instability during transport, and in the worst cases, yarn breakage during high-speed winding or knitting.
Consistency at the taper angle and dimension level is what lets a winding line run without manual adjustment between batches. That's the standard we hold to on both taper angles we produce — 4°20′ and 5°57′ — regardless of order size or production method.
Manual and Automatic Production, by Order
Aziz Packaging runs both fully automatic and manual production lines. Automatic production is our standard recommendation for repeat, higher-volume orders where consistency across a large batch matters most. Manual production remains available as a cost and volume option for buyers with smaller or trial orders — it is a commercial choice, not a quality compromise, and we'll recommend the right method once we know your order size and machine.
Machine Compatibility
Our standard cones are used on automatic winding machines including Murata, Savio and Schlafhorst autoconers, as well as on manual and semi-automatic cone winders. Confirm your machine make and model when requesting a quote and we will confirm the right taper and dimensions for your holder.
The 5°57′ taper is the standard for high-speed autoconers (Schlafhorst X5/X6, Murata QPRO, Savio Orion/Polar/Espero). The 4°20′ taper is used on TFO twisters and ring doubling machines. Using the wrong taper angle causes the cone to sit loose on the spindle holder, resulting in vibration and package defects. For a full machine-by-machine breakdown, see our 4°20′ vs 5°57′ taper angle guide.
Our standard taper angles and notch dimensions are also made to fit the Rieter Autoconer X6. See our machine compatibility guide for dimensions by brand — tell us your machine model when requesting a quote and we'll confirm fit.
Shipping and Terms
All orders ship FOB Chattogram, Bangladesh, with packaging and port shipment already built into the cone cost — see our FOB Chattogram export terms page for what's included and what the buyer arranges. Cones classify under HS code 4822.10.00 — see our HS code and import duty page for the equivalent code in your country.
Surface Finish Options
Aziz Packaging produces paper cones in three surface finishes — smooth, velvet, and embossed. Surface finish affects how the first yarn layers seat and grip the cone during winding, and selecting the wrong finish for your yarn type is a common cause of slippage on the opening layers. For a full selection guide by yarn count and fibre type, see our surface finish guide.
A clean, even surface for general yarn winding applications.
A softer surface texture suited to yarns that benefit from additional grip during winding.
A patterned surface used where extra yarn hold is required.
Why Spinning Mills Choose Aziz Packaging
- Standard specifications produced consistently, lot after lot
- Both manual and auto-machine production to match your order
- Local manufacture in Narayanganj 1450, Bangladesh — short lead times
- Export-ready on FOB terms with standard documentation
For full detail on sourcing, MOQ, container configuration and export documentation, see the paper cone supplier Bangladesh page.
What to Check Before Choosing a Supplier
Beyond taper angle, dimensions and finish, two supplier-level factors are easy to overlook until they cause a problem:
Packaging and delivery reliability — paper cones can be damaged during storage and transport if packaging is poor. Ask how cones are protected from crushing, moisture and deformation in transit, and what dispatch planning the supplier offers so your production schedule isn't left waiting on an unreliable shipment.
Supplier experience with spinning mills specifically — a supplier who understands winding machine requirements will confirm taper angle and dimensional tolerances in writing, provide batch-level quality data rather than a single sample, and demonstrate consistent output across multiple deliveries, not just the qualification batch.
Frequently Asked Questions
What is a paper cone for spinning mills?
A paper cone for spinning mills is a tapered kraft paperboard carrier onto which yarn is wound during ring spinning, open-end spinning, cone winding and autoconer processes. It replaces plastic or wooden carriers in most textile applications because it is lighter, recyclable and manufactured to the precise taper angles winding machines require.
What taper angle do spinning mills use for paper cones?
The two standard taper angles are 4°20′ and 5°57′. 5°57′ is the standard for high-speed autoconers such as Schlafhorst X5/X6, Murata QPRO and Savio Orion/Polar/Espero. 4°20′ is used on TFO twisters and ring doubling machines. See our taper angle comparison guide for a full breakdown.
What paper grade and weight are used?
Standard specification is 350–450 GSM kraft paperboard, typically 40g to 42g per cone. Mills running fine-count or synthetic yarn at maximum speed often specify toward the upper end of both ranges for added structural strength.
Which winding machines are these cones compatible with?
Our standard cones run on Murata, Savio and Schlafhorst autoconers as well as manual and semi-automatic cone winders. Confirm your machine make and model when requesting a quote so we can match the correct taper and nose/base dimensions to your holder.
What is the minimum order quantity?
Standard MOQ is 100,000 pieces per shipment, which aligns with efficient container loading and production run size. See our MOQ guide for the full logic behind that number.
How are paper cones for spinning mills exported from Bangladesh?
We export on FOB Chattogram (Chattogram) terms with standard commercial documentation, shipping to major ports including Nhava Sheva, Jebel Ali and Djibouti. See our paper cone supplier Bangladesh page for full sourcing and export detail, our paper cone supplier for Indian spinning mills page for the India-specific route and duty treatment, or our paper cone supplier for Pakistani spinning mills page for the Karachi and Port Qasim route.
Can I get a sample before placing a bulk order?
Yes — confirm your machine model and taper angle on WhatsApp and we'll arrange a sample batch.
Aziz Packaging Limited is a kraft paper cone manufacturer based in Narayanganj 1450, Bangladesh. We manufacture paper cones for textile yarn winding in 4°20′ and 5°57′ taper angles, in smooth, velvet, and embossed surface finishes. Our cones are made to fit Murata, Savio, Schlafhorst, and Rieter Autoconer winding machines. All orders ship FOB Chattogram, Bangladesh, with production, packaging and port handling included in the price.
Request a Quote
Tell us your machine, taper angle and monthly quantity — we'll confirm specification and lead time for spinning mill orders.
Thank you. We will get back to you within 24 hours on WhatsApp or email.