Why Machine Compatibility Is the First Specification, Not the Last
Machine compatibility determines every other paper cone specification you need to order correctly. Taper angle governs how the cone seats on the spindle; nose and base diameter govern whether the cradle grips it correctly; notch type governs whether an automatic doffer can catch and anchor the yarn tail. Get any one of these wrong for your specific machine, and the failure shows up as vibration, a tension fault, or a stoppage the operator blames on the yarn or the machine — not the cone. Confirming compatibility before ordering, rather than after a bad batch arrives, is the cheapest step in the entire sourcing process.
Paper Cone Compatibility by Machine Brand
Full dimensional comparison across every machine brand Aziz Packaging supports or is confirming. Open the linked guide for the complete specification, diagnostics and ordering checklist for your machine.
| Machine | Taper Angle | Length | Nose ID | Base ID | Notch Type | Full Guide |
|---|---|---|---|---|---|---|
| Murata QPRO / Process Coner / Vortex MVS | 4°20′ or 5°57′ (5°57′ standard) | 170mm (173mm some configs) | 27–28.5mm | 67.5–68.5mm | V-notch | Murata guide → |
| Savio Orion / Polar / Espero | 5°57′ | 170mm (173mm some configs) | 27–28.5mm | 67.5–68.5mm | V-notch standard (Polar: V or Y) | Savio guide → |
| Schlafhorst Autoconer 338 | 5°57′ | 170mm (173mm some configs) | 27–28.5mm | 67.5–68.5mm | V-notch or Y-notch (doffer-dependent) | Schlafhorst guide → |
| Schlafhorst Autoconer X5 / X6 | 5°57′ | 170mm (173mm some configs) | 27–28.5mm | 67.5–68.5mm | Y-notch standard | |
| TFO twisters / doubling machines | 4°20′ | Per auto-doffer configuration | — | |||
| Rieter Autoconer X6 — 4°20′ | 4°20′ (DIN ISO 8489-3) | 170mm | 33mm | 59mm | — | Rieter guide → |
| Rieter Autoconer X6 — 5°57′ | 5°57′ (DIN ISO 8489-5) | 170mm | 33mm | 68mm | — | |
Rieter Autoconer X6 figures are confirmed to DIN ISO 8489-3 / 8489-5. Running Zinser ring spinning frames? Zinser doesn't manufacture autoconers — mills running Zinser frames typically wind downstream on a Rieter Autoconer X6 or a Schlafhorst Autoconer, so the specification depends on your winder's own nameplate, not the spinning frame brand. Toyota's current lineup does not include an autoconer. Don't see your machine? Contact us with your make and model.
Compatibility Guides by Machine
Each guide covers the exact taper angle, dimensions, notch type and surface finish requirements for that machine, plus common stoppage diagnostics.
Murata QPRO, Process Coner, Mach Splicer & Vortex MVS
V-notch requirement, nose/base tolerances and stop-code diagnosis for QPRO/Process Coner, plus Vortex MVS spinning-specific finish and package requirements — one complete Murata guide.
Murata Compatibility Guide →Savio Orion, Polar & Espero
Full specification set for Savio autoconers — taper, length, weight, GSM, tolerances and notch type.
Savio Compatibility Guide →Schlafhorst Autoconer 338, X5 & X6
Notch type differences between generations, Bobbin Cloud considerations, and dimensional specifications.
Schlafhorst Compatibility Guide →Savio, Murata & Schlafhorst — Overview
A cross-brand summary of what every automatic winder expects from a paper cone, for mills running mixed machine populations.
Cross-Brand Overview →Rieter Autoconer X6
Confirmed DIN ISO 8489 dimensions for both taper angles, surface finish selection and common fitting issues — including guidance for Zinser mills winding downstream on an Autoconer X6.
Rieter Compatibility Guide →Running Zinser ring spinning frames? Zinser doesn't manufacture autoconers — see the Rieter Autoconer X6 guide for the winder specification your mill most likely needs. Running a different machine brand or model? Contact us with your machine make and model and we will confirm the correct specification.