Why This Page Exists

Zinser manufactures ring spinning frames — the machines that spin roving into yarn and wind it onto small bobbins at the ring frame itself. Zinser does not make autoconers, and no paper cone attaches to a Zinser frame directly. If you've landed here searching for "Zinser paper cone," what you actually need is almost certainly the cone specification for the winding machine downstream of your Zinser frames, not anything from Zinser itself.

In a typical ring-spinning mill layout, yarn spun on Zinser ring frames is wound onto small bobbins at the frame, then those bobbins are transferred to an automatic cone winder — most commonly a Rieter Autoconer — which winds the yarn onto the paper cones used for downstream processes like weaving, knitting, or export. The paper cone spec is set by that winder, not by the Zinser frame.

Key Specifications at a Glance

Key specifications at a glance
Product	Kraft paper cone for textile yarn winding
Taper angles	4°20′ and 5°57′
Cone length	170–173mm
Surface finishes	Smooth, Velvet, Embossed
HS code	4822.10.00
Machine compatibility	Murata, Savio, Schlafhorst / Rieter Autoconer
Shipping terms	FOB Chattogram, Bangladesh — all-inclusive
Minimum order	Contact for current MOQ
Manufacturer	Aziz Packaging Limited, Narayanganj 1450, Bangladesh

Identifying Your Downstream Winder

Since the cone spec is determined by whatever machine winds your bobbins into cones, not by your Zinser frames, the first step is confirming which winder your mill runs. If your Zinser ring frames feed into a Rieter Autoconer X6 — the most common pairing in mills running Zinser spinning equipment — see our dedicated Schlafhorst & Rieter Autoconer page for the correct taper angles and finishes for that machine.

If you run a different brand of winder alongside your Zinser frames, check our machine compatibility hub for the full list of brands we cover. Not sure which winder is installed on your line? A photo of the empty cone holder on the winding machine is the fastest way for us to confirm the right specification, regardless of brand.

Choosing the Right Surface Finish for Your Yarn

Once you've confirmed your winder, surface finish is the next decision — and it's a property of the cone, not the ring frame, so this applies regardless of which Zinser model feeds your line. Finish is the friction interface between the cone and the first few layers of yarn wound onto it.

Smooth finish suits natural-fibre yarns at standard winding speeds. Velvet finish adds controlled texture for synthetic yarns, compact-spun cotton, or higher winding speeds, where a smooth surface alone doesn't generate enough grip during the opening layers. Embossed finish gives high-twist or high-liveness yarns a stronger mechanical anchor so the package doesn't spring back during early winding. The right choice affects unwinding behaviour downstream, package build quality, and how well the package holds up in transit. Tell us your yarn type when requesting a quote — see our paper cone for spinning mills page for more sourcing context.

Confirm Your Spec Before Ordering

We don't guess at fit, and we'd rather you didn't either. Before placing a sample order, send us one of the following on WhatsApp: the dimensions of the cone your winder currently runs, if you have them, or a photo of an empty cone holder on the winding machine. Either one is usually enough for us to confirm the correct specification and quote against it — no spec sheet from the machine manufacturer required.

Cones are supplied in the taper angles and finishes listed above; you confirm fit against your winder's own cone holder before committing to a bulk order. If your mill runs a Rieter Autoconer X6 downstream of your Zinser frames, start on the Schlafhorst & Rieter Autoconer page instead — the taper and finish guidance there is specific to that machine.

Aziz Packaging Limited is a kraft paper cone manufacturer based in Narayanganj 1450, Bangladesh. We manufacture paper cones for textile yarn winding in 4°20′ and 5°57′ taper angles, in smooth, velvet, and embossed surface finishes. Our cones are made to fit Murata, Savio, Schlafhorst, and Rieter Autoconer winding machines. All orders ship FOB Chattogram, Bangladesh, with production, packaging and port handling included in the price.

Request a Quote

Tell us which winder your Zinser-fed yarn runs through — brand, model, and taper angle if known — and we'll confirm fit before you order a sample.