PAPER CONE SAMPLE AND INCOMING-INSPECTION RECORD
Aziz Packaging Limited | https://azizpackagingltd.com/paper-cone-specifications
Blank buyer worksheet — not a test certificate or completed inspection record.

ORDER AND REFERENCE
Buyer / mill:
Supplier:
Order / lot reference:
Approved sample ID / drawing revision:
Inspection date / inspector:
Storage / conditioning conditions:
Production method agreed for this order:
Machine model / holder / winding setup:
Yarn type / intended operating conditions:

AGREED REQUIREMENTS (complete before inspection)
Taper designation and angle convention:
Axial length nominal / tolerance:
Top inner diameter nominal / tolerance / distance from rim:
Bottom inner diameter nominal / tolerance / distance from rim:
Outer dimensions or wall thickness, if required:
Finished cone weight / agreed range:
Paper grade (GSM — not finished cone weight):
Surface finish / rim color / printing / notch requirements:
Sampling plan / sample quantity / lot size:
Measurement tools / calibration or check reference:
Agreed roundness method / limits:
Carton quantity / dimensions / net and gross weight / marking:

INDIVIDUAL MEASUREMENTS (repeat for each sample; retain all readings)
Sample ID:
Axial length:
Top ID — measurement depth and readings in agreed orientations:
Bottom ID — measurement depth and readings in agreed orientations:
Finished cone weight:
Inner-wall observations (loose fibres, adhesive, damage):
Rim / notch / finish observations:
Pass / hold / reject against the agreed requirements:
Notes and photograph references:

MILL TRIAL AND RELEASE
Trial date / machine settings / trial duration:
Reference product or comparison lot:
Fit, package formation and unwinding observations:
Stops or defects recorded with the agreed method:
Decision / approver / approval date:
Corrective action or additional sample required:

AVAILABLE RANGES FOR INITIAL DISCUSSION
4°20′ family: top ID 27.5–28.5 mm; bottom ID 57.5–58.5 mm.
5°57′ family: top ID 27–28.5 mm; bottom ID 67.5–68.5 mm.
Both families: axial length 170–173 mm; paper grade 350–450 GSM.
These ranges are not manufacturing tolerances or batch test results.
Confirm exact dimensions, measurement positions and acceptance criteria in writing.
Degree-minute taper labels must not be treated as decimal angles.

Reviewed 21 September 2026. Keep completed records private.